Epson SC-P7000 Series User Manual

Setting Procedures for Printing
Making Settings in Windows
A
When the printer driver's Main screen is
displayed, you can configure various settings
required for printing such as Media Type,
Source, Size.
U “Printing (Windows)” on page 48
B
Select Borderless, and then click Expansion.
You can not choose the expansion amount when
Roll Paper or Roll Paper (Banner) is selected for
Source.
C
Select Auto Expand or Retain Size as the
Method of Enlargement.
If you select Auto Expand, set how much of the
image goes beyond the edge of the paper as
shown below.
Max : 3 mm for left and 5 mm for right (the
image shifts 1 mm to the right)
Normal : 3 mm for left and right
Min : 1.5mm for left and right
Note:
Moving the slider towards Min decreases the image
enlargement ratio. Therefore, some margins may
appear at the edges of the paper depending on the
paper and printing environment.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Printing Varieties
80

Epson SC-P7000 Series Specifications

General

Brand	Epson
Model	SC-P7000 Series
Category	Printer
Language	English