2. Set up the following items as necessary.
❏ Language
Select the displayed language on the control panel.
❏ Panel Lock
If you select ON, the administrator password is required when you perform an operation that requires the
administrator's authority. If the administrator password is not set, the panel lock is disabled.
❏ Operation Timeout
If you select ON, when you log in as the administrator, you are automatically logged out and go to the
initial screen if there is no activity for a certain period of time.
You can set between 10 seconds and 240 minutes by the second.
Note:
You can also set up from the printer’s control panel.
❏ Language : Menu > General Settings > Basic Settings > Language
❏ Panel Lock : Menu > General Settings > System Administration > Security Settings > Admin Settings > Lock
Setting
❏ Operation Time Out : Menu > General Settings > Basic Settings > Operation Time Out (You can specify On or
O.)
3. Click OK.
Related Information
& “Accessing Web Cong” on page 23
& “Logging on to the Printer Using Web Cong” on page 35
Power Saving Settings During Inactivity
You can set up the time to
shi
to the power saving mode or to turn the power
o
when the printer’s control panel
is not operated for a certain period of time. Set the time depending on your usage environment.
1. Access Web
Cong
and select the Device Management tab > Power Saving.
2. Enter the time for the Sleep Timer to switch to power saving mode when inactivity occurs.
Note:
You can also set up from the printer’s control panel.
Menu > General Settings > Basic Settings > Sleep Timer
3.
Select the turning
o
time for the Power
O
Timer.
Note:
You can also set up from the printer’s control panel.
Menu > General Settings > Basic Settings > Power O Timer
4. Click OK.
Related Information
& “Accessing Web Cong” on page 23
Administrator's Guide
Function Settings
29
To Next Page
Loading...
Need help?
General