ii
Confidential
4-1 Add the paper types for original and specified paper.
Reason for change:
To make the explanation easier to understand.
6-10
Add the note about the setting for serial communication conditions.
6-13
Changed the explanation for the ”Capacity of the receive buffer” that is the
function for the”memory switch1-2”
old: Capacity of the receive buffer “large“/OFF.
new: Capacity of the receive buffer “4KB“/OFF.
old: Capacity of the receive buffer “small“/ON.
new: Capacity of the receive buffer “45B“/ON.
Reason for change:
To make the explanation easier to understand.
Rev. B 6-15 Add the felow explanation for “select paper withs”.
43 steps in increment of 1 mm, except for the size from 71 mm to 79 mm
Reason for change:
To make the explanation easier to understand.
7-3 Add the explanation for “Precautions on paper handling“.
When the printer is not used for one week or more, it is recomended not to leave
the thermal paper between the platen and the print head.
Reason for change:
Missing information.
Appendix A Add the explanation for the paper types for original and specified paper . (To
ensure print quality, be sure to use the specified paper.)
old: Label paper
new: Lavel paper (with black mark)
Lavel paper (without black mark)
Reason for change:
Missing information.
Appendix D The parts below were newly provided.
spacer
Sheet, holder guide, C
Sheet, holder guide, D
Rev. Page Description
To Next Page
Loading...
Need help?
General
