7-6 Handling Rev.B
Confidential
Loading the paper roll
CAUTION:
❏
The manual cutter blade is sharp. Do not touch it with your hands when mounting or
replacing roll paper, because you can be injured.
❏
Be aware that the thermal print head and its supporting parts become very hot. Be
sure not to touch these parts. Touching them may cause burns.
Note:
Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to
the core, because the printer cannot detect the paper end correctly.
1. Make sure the printer is not receiving data; otherwise, it may be lost. Open the paper roll
cover by pressing the cover-open button.
2. Load the roll paper inside the printer in the correct direction.
Horizontal installation
Vertical installation
To Next Page
Loading...
Need help?
General
