To Next Page

To Previous Page

7.15 Adjust way line

7.15.1 Way line offset

Display

(A) Way line distance input field

(B) Auto Offset

(D) Manual way line offset input field

(E) Overall offset display

(F) Overall offset Reset button

Auto Offset (B): If the overlap/under lap becomes

too great while working in the field, the tractor can

be guided precisely onto the way-line manually and

then the AUTO OFFSET (softkey field in front of

the tractor) can be pressed The way-lines are

moved to the center of the tractor. Automatic

steering then has to be re-activated from the MFA.

This function cannot be selected while automatic

way-line guidance is active.

Manual way-line offset (D): If the tractor diverges

too far from the way-line (e.g. on a slope), the way-

lines can be moved to the right or left while the

tractor is moving and without interrupting

guidance, by entering a decimal value (D) and

pressing the softkey to the right or left of the

entered value. This will move the track by the

value entered here. The machine moves in the

direction of the arrow.

Overall offset (E, F): Overall offset is the sum of

Auto Offset and manual way-line offset. Press the

softkey (F) to reset the value to 0.

Gesamtversatz

Manueller Spurlinienversatz

Spurabweichung

Spurlinienabstand

0,00

0,20

0,00

5,90

VarioGuide Hauptseite

Fig. 89

7. Start-up

128 VarioGuide

438.020.070.012

FENDT varioguide User Manual

Questions and Answers: