Display
Baud rate Setting data for external radio modem
Parity Setting data for external radio modem
Signal format Setting data for external radio modem
7.7.2.2 External fallback station
Procedure
Press toggle switch (A), the fallback option
will either be activated or deactivated.
NOTE:
Enabling this function allows wayline
guidance to a lower degree of accuracy.
Fig. 44
7.7.3 RTK network (internal mobile radio modem)
7.7.3.1 Configure the internal mobile modem correction signal
NOTE:
After the ignition has been switched OFF/ON, the system connects to the GSM/GPRS network
automatically and without further notice, provided that a connection was established before the ignition
was switched off. Please note that this action may result in data charges.
7. Start-up
96 VarioGuide
438.020.070.012
To Next Page
Loading...
Need help?
General