7.2.3.7 Set the trigger for the front-mounted implement
Procedure
Select and activate the trigger by touch or via
the external control panel.
NOTE:
Measurement takes place once all activated
trigger conditions are fulfilled simultaneously.
(A) Toggle switch Auto/I (ON)
NOTE:
If toggle switch (A) is set to I, the
distance and area are always
measured, except when the on-board
computer is paused. The other buttons
are grayed out.
If toggle switch (A) is set to AUTO, the
distance and area measurement
depends on triggers (B) to (F).
(B) Front power lift trigger OFF/ON
(C) Front PTO trigger OFF/ON
(D) EHS valve trigger OFF/ON
(E) External counter trigger OFF/ON
(F) VarioGuide trigger OFF/ON
(H) Jump back one menu level
Fig. 16
7. Start-up
VarioGuide 75
438.020.070.012
To Next Page
Loading...
Need help?
General