FENDT varioguide User Manual

Procedure
1.
Start work and drive approx. 10 m.
2.
Measure the processed width (working width).
3.
Measure the length between the navigation point of the implement and the attachment hook
NOTE:
The navigation point is the point on the implement that follows the wayline.
4.
Measure the length between the start of the processed area and the attachment hook of the front
power lift
NOTE: If the mark is to be created at the end of the implement, measure from this point to the end
of the implement.
7.2.4.3 Set the navigation point of the rear-mounted implement
Procedure
1.
Select the navigation point field (A) by touch
or via the external control panel.
2.
Set the navigation point distance via the
external control panel.
Fig. 21
7. Start-up
78 VarioGuide
438.020.070.012

FENDT varioguide Specifications

General

Brand	FENDT
Model	varioguide
Category	Tractor Accessories
Language	English