FENDT varioguide User Manual

7.6.2 EGNOS / WAAS
Set correction signal
Select the correction signal via the "Signal
Type" selection field.
Fig. 40
Display
Satellite receiver Designation of the installed receiver
Signal type The correction signal source can be selected here
Accuracy Bar indicator and decimal value of static accuracy
Signal lag Specifies the time in s taken to receive the correction signal update. If 999 is
shown here, the correction signal cannot be currently received.
Connection status Specifies the connection status of the GNSS receiver to the source of the
correction data (e.g. connected, update required, expired). The tick shows
whether the GNSS receiver is currently connected to the correction data
source.
Authorisation level Specifies the accuracy level of the GNSS receiver (depending on the hardware
modules installed in the receiver)
7. Start-up
92 VarioGuide
438.020.070.012

FENDT varioguide Specifications

General

Brand	FENDT
Model	varioguide
Category	Tractor Accessories
Language	English