FENDT varioguide User Manual

7. Start-up
7.1 Load implement .........................................................65
7.1.1 Caution .............................................................65
7.1.2 Load implement settings (7" terminal) .......................................65
7.1.3 Load implement settings (10.4" terminal) .....................................66
7.2 Create implement .......................................................67
7.2.1 Call up implement settings on 7" ..........................................67
7.2.2 Call up implement settings on 10.4" ........................................68
7.2.3 Front-mounted implement ...............................................69
7.2.3.1 Install front-mounted implement ....................................69
7.2.3.2 Determine the working width, navigation point distance and coupling length ....70
7.2.3.3 Set the working width of the front-mounted implement ...................71
7.2.3.4 Set the navigation point of the front-mounted implement ..................72
7.2.3.5 Set the coupling length for the front-mounted implement .................73
7.2.3.6 Set the center of the front-mounted implement .........................74
7.2.3.7 Set the trigger for the front-mounted implement ........................75
7.2.4 Rear-mounted implement ................................................76
7.2.4.1 Install rear-mounted implement .....................................76
7.2.4.2 Determine the working width, navigation point distance and coupling length ....77
7.2.4.3 Set the navigation point of the rear-mounted implement ...................78
7.2.4.4 Set the coupling length for the rear-mounted implement ..................79
7.2.4.5 Set the center of the rear-mounted implement .........................80
7.2.4.6 Set the trigger for the rear-mounted implement .........................81
7.3 Save mounted implement data ...........................................82
7.3.1 Save implement on stopping .............................................82
7.4 Exchange implement data and field data ..................................84
7.4.1 Plug in the USB stick and call up data exchange ................................84
7.4.1.1 Insert USB stick ................................................84
7.4.1.2 Call up data exchange on 10.4" .....................................84
7.4.2 Transfer implement data and field data to the USB stick ..........................85
7.4.2.1 Select and transfer all data .........................................86
7.4.3 Transfer implement and field data from the USB stick to the terminal ................87
7.4.3.1 Select and transfer all data .........................................89
7.5 Correction signals .......................................................90
7.5.1 Overview of correction signals depending on the receiver ........................90
7.6 Submeter range with NovAtel receiver ....................................91
7.6.1 Autonomous .........................................................91
7.6.2 EGNOS / WAAS ......................................................92
7.7 Centimeter range with NovAtel receiver ..................................93
7.7.1 FENDT base station ....................................................93
7.7.1.1 Configure the FENDT base station correction signal ......................93
7.7.1.2 Fallback: FENDT base station .......................................94
7.7.2 External station .......................................................95
7.7.2.1 Configure the external station correction signal ..........................95
7.7.2.2 External fallback station ...........................................96
7.7.3 RTK network (internal mobile radio modem) ...................................96
7.7.3.1 Configure the internal mobile modem correction signal ....................96
7.7.3.2 Activate/deactivate internal mobile modem fallback .......................98
7.7.4 RTK network (external mobile radio modem) ..................................98
7.7.4.1 Configure the external mobile modem correction signal ....................98
Table of contents
VarioGuide 63
438.020.070.012

FENDT varioguide Specifications

General

Brand	FENDT
Model	varioguide
Category	Tractor Accessories
Language	English