FENDT varioguide User Manual

7.8 Submeter range with Trimble receiver ................................... 100
7.8.1 Autonomous ........................................................ 100
7.8.2 EGNOS / WAAS ......................................................101
7.8.3 RangePoint RTX ......................................................102
7.9 Decimeter range with Trimble receiver ...................................103
7.9.1 CenterPoint RTX Satellite ............................................... 103
7.9.1.1 Set correction signal for Centerpoint RTX Satellite .......................103
7.9.1.2 Fallback for Centerpoint RTX Satellite ................................104
7.10 Centimeter range with Trimble receiver .................................105
7.10.1 FENDT base station .................................................. 105
7.10.1.1 Configure the FENDT base station correction signal — Trimble AG-715 450
MHz radio modem ....................................................105
7.10.1.2 Configure the FENDT base station correction signal (Trimble 900 MHz) ...... 106
7.10.2 RTK network (internal GSM/GPRS modem) ................................. 107
7.10.2.1 Configure the internal mobile modem correction signal (GSM/GPRS) ........ 107
7.10.3 RTK network (external mobile radio modem) ................................ 108
7.10.3.1 Configure the external mobile modem correction signal ..................108
7.10.4 Trimble receiver settings ...............................................109
7.10.4.1 xFill settings ................................................. 109
7.11 Field Settings ......................................................... 111
7.11.1 Add field .......................................................... 111
7.11.2 Record field boundary .................................................112
7.11.3 Record/manage obstacles ..............................................115
7.12 Way-line ..............................................................119
7.12.1 Create and save way line ..............................................119
7.12.2 Path to path distance ................................................. 124
7.13 Check system ......................................................... 125
7.13.1 Check system info/system status ........................................125
7.14 Activate VarioGuide system ............................................127
7.14.1 Switch on automatic way line guidance ....................................127
7.15 Adjust way line ........................................................128
7.15.1 Way line offset ..................................................... 128
7.16 Headland settings ..................................................... 129
7.16.1 Headland settings ................................................... 129
7.16.2 Headland management TI/AutoTI ........................................ 131
7.17 Operation with the base station ........................................ 133
7.17.1 Brief description .................................................... 133
7.17.2 Scope of delivery and accessories ........................................133
7.17.3 LED and keys on the base station ........................................ 136
7.17.4 Initial start-up .......................................................137
7.17.5 Operating modes .................................................... 138
7.17.6 Start-up ........................................................... 138
7.17.7 Set the base station channel on the tractor ................................. 139
7.17.8 Operate base station with external battery ..................................141
Table of contents
64 VarioGuide
438.020.070.012

FENDT varioguide Specifications

General

Brand	FENDT
Model	varioguide
Category	Tractor Accessories
Language	English