Fossil WRIST PDA User Manual

Introduction to the Wrist PDA Watch
Displaying the time
Wrist PDA User Guide 15
Displaying the time
Your Wrist PDA watch automatically displays the time after a brief
period of inactivity (when you have not used the stylus or pressed
any of the buttons). You can select the specific period of time after
which the watch face appears, ranging from 30 seconds to two
minutes (see page 81).
NOTE: For ease of viewing in dark conditions, turn on the
backlight. Press and hold Back until the light activates.
See these sections for details:
• To set the date and time, see page 84
• To select a different watch face style, see page 81
You can also install third-party applications for displaying the time,
but they will not automatically run like the built-in watch feature. See
page 35 for details on installing add-on applications.
Switching to PDA mode
When the watch face is displayed, you can switch to PDA mode by
pressing and holding Rocker Enter on the right side of the watch.
NOTE: You can set how long you have to hold Rocker Enter to
switch to PDA mode (see page 88).
Press to activate PDA mode

Fossil WRIST PDA Specifications

General

Brand	Fossil
Model	WRIST PDA
Category	Watch
Language	English