FUJITSU DL3100
5-46 User’s Manual
DLMENU
In the CDROM is a software utility called “DLMENU”.
This application enables a convenient, simple, and fast way to control
your printer without touching any keys on the operation panel.
1. Start the tool installation by double clicking the “DLMENU
Setup.exe”.
2. Connect the printer to the system using USB or Parallel cable.
3. Power up the printer.
4. Run the tool from the Windows Start menu by selecting All
Programs, and then FUJITSU Printer Setup.
5. For more information on how to use the tool, go to the Help menu
and select User Guide.
Note: Ensure to disconnect the DLMENU before sending the printing
data,otherwise the data will not be printed or be printed in a incorrect
way.
To Next Page
Loading...
Need help?
General
