Fujitsu DL3100 User Manual

FUJITSU DL3100
8-4 User’s Manual
Paper Handling Problems and Solutions
Table 8.2 describes common paper handling problems and
suggests
Table 8.2 Paper Handling Problems and Solutions
Problem Solution
Paper cannot be loaded or fed.

Make sure that the paper select lever
located on the top right of the
printer is set correctly. Move the
lever to the front for single sheets or
to the rear for continuous forms.
 Make sure that the paper covers the
paper-out sensor.
Paper jams while loading.

Turn off the printer and remove the
jammed paper. Remove any
obstructions from the paper path.

Make sure that the Print Gap lever is
set for the thickness of your paper.
 Make sure that the paper is not
folded, creased, or torn.
 Make sure that the left and right
tractors are set so that the
continuous forms are stretched taut.
 When using continuous paper, user
must keep the sheed feeder across,
not upright.
Paper jams while printing.

Turn off the printer and remove the
jammed paper. Remove any
obstructions from the paper path.

Make sure that the Print Gap lever is
set for the thickness of your paper.
 For continuous forms, make sure
that the incoming and outgoing
paper stacks are correctly placed.
Paper should feed straight.
Paper slips off the forms tractors
or the perforated holes of the
paper tear during printing.

Make sure that the forms tractors
are positioned correctly for the
width of your paper and that the
perforated holes of the paper fit
directly over the tractor pins.

Fujitsu DL3100 Specifications

General

Brand	Fujitsu
Model	DL3100
Category	Printer
Language	English