Fujitsu DL3100 User Manual

FUJITSU DL3100
5-36 User’s Manual
BLACK MARK
PARAMENTERS
This printer uses tractors to load fanfold forms with pre-printed
black marks.
The printer requires 3 parameters to print on paper with black
marks:
1. Horizontal offset of black mark from the edge of page
(called Black Mark Physical Horizontal Position); later on,
this value facilitates the printer to locate its scanner
preparing for identifying the black marks.
2. Vertical offset of the first print line from the black mark
(called Distance Offset From Black Mark To Print
Position); later on, the print makes use of this value to
print the first line relative to the black mark.
3. Vertical offset of the tear-off edge from the black mark
(called Distance Offset From Black Mark To Tear
Position); this value informs the printer the tear-off
position of the page.
Not to skip or change the order of setting the above 3
parameters.

Fujitsu DL3100 Specifications

General

Brand	Fujitsu
Model	DL3100
Category	Printer
Language	English