Fujitsu DL3100 User Manual

FUJITSU DL3100
5-10 User’s Manual
INTERFACE
SETUP
Interface setup
Valid Settings
Function
PnP
No, Yes
No: Disables plug and play for USB
Yes: Enables plug and play.
USB ID
No, Yes
No: Disables USB ID.
Yes: Enables USB ID
*The following options can only be set when carrying the RS232C Interface
Interface setup
Valid Settings
Function
Interface
Share,USB,Serial
Share: Printer can detect the type of input
signal and activate the USB or RS232C serial
port automatically.
USB: The printer can only use USB port.
Serial: The printer can only use RS232C serial
port.
Baud Rate
9600,19200,38400,
4800,2400,1200,
115200
This parameter chooses the transmission rate
of RS232C serial interfaces.
Data Bit
8,7
8: The number of each bit is 8.
7: The number of each bit is 7.
Parity Check
None,Odd,Even
None: Bidirectional transmission has no
odd-even check.
Odd: Bidirectional transmission uses Odd
parity.
Even: Bidirectional transmission uses Even
check.
Stop Bit
1,2
1: Transmit data bytes use one stop bit.
2: Transmit data bytes use two stop bits.
Data Stream
No,Hardware,
Xon/Xoff
No: RS232C serial port has no flow control
Hardware: RS232Cserial port flow control is
hardware.
Xon/Xoff: RS232Cserial port flow control is
software.

Fujitsu DL3100 Specifications

General

Brand	Fujitsu
Model	DL3100
Category	Printer
Language	English