Fujitsu DL3100 User Manual

FUJITSU DL3100
User’s Manual 5-1
5
CHAPTER 5 PRINTER SETTING CHANGES
PRINTER SETTING CHANGES
In order to meet specific print requirements, the printer
configurations may be changed as follows: Hold down the [Tear off]
key while powering on the printer and then release the key when the
print head starts to move. The printer will enter Main Menu setup
state. Follow the instructions printed on how to make setting
changes. When a new setting is saved, it is retained after the printer
has been powered off.
The Printer Settings menu contains 8 sub-menus:
System Setup, Paper Setup, Interface Setup,
Character Setup, Other Setup, Bi-directional
Alignment, BlackMark Mode.
This chapter describes the following operations:
- System Setup
- Paper Setup
- Interface Setup
- Character Setup
- Other Setup
- Black Mark Parameters
- Bidirectional Alignment
Note: Bold italic item is the default setting.

Fujitsu DL3100 Specifications

General

Brand	Fujitsu
Model	DL3100
Category	Printer
Language	English