Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Figure 32: Installing the cable clamp
▶
Push the cable clamp into the corresponding hole until it clicks in.
Concluding steps
▶
"Connecting the power cord" on page
56
.
▶
"Performing a fan test" on page 96.
6.4.3 Removing a hot-plug PSU
Customer Replaceable
Unit (CRU)
Hardware: 5 minutes
Tools: tool-less
Note for servers using CMA (Cable Management Arm)
Regarding of removing PSUs, additional tasks are needed, due to an
interference between CMA stopper and the PSUs.
Power supply unit (PSU)
108 Upgrade and Maintenance Manual RX1330 M4

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX1330 M4
Category	Server
Language	English