Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

▶
If applicable, ask the system administrator to enter the recovery key in order
to boot the OS.
If BitLocker Drive Encryption has been suspended prior to replacing
components you won't be asked for a recovery key when rebooting
the server after the maintenance task. However, if BitLocker
functionality has not been suspended, Windows will enter recovery
mode and ask you to input recovery key for further booting.
▶
Ask the system administrator to enable the previously suspended BitLocker
protection on the system volume, using the BitLocker Drive Encryption
control panel item:
▶
Click Start - Control Panel - System and Security - BitLocker Drive
Encryption to open the BitLocker Drive Encryption.
▶
Select the system volume, and click Resume Protection.
For more information on how to resume BitLocker drive encryption, see
the Microsoft TechNet library at:
https://technet.microsoft.com/library/cc731549.aspx
For more information, see the Fujitsu web pages.
5.3.15
Performing a RAID array rebuild
After replacing an HDD that has been combined into a RAID array, RAID
rebuild will be performed completely unattended as a background process.
▶
Ensure that the RAID array rebuild has started normally
. Wait until the
progress bar has reached at least one percent.
▶
Inform the customer about the remaining rebuild time, based on the
displayed duration estimate.
Basic software procedures
RX1330 M4 Upgrade and Maintenance Manual 87

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX1330 M4
Category	Server
Language	English