How to Load Documents
This section explains how to load documents on the scanner.
Loading Documents
This section explains how to load documents of normal paper.
Preparation
When you load multiple documents in the ADF paper chute (feeder), make the following preparations.
HINT
For details about the paper size and quality required for normal operations, refer to Documents for Scanning
(page 52).
1 Check the documents.
a Check whether the documents to be loaded are of the same width or not.
Ways to load documents differ depending on whether the documents are of the same width or not.
If the documents are of different width, refer to Conditions for Mixed Batch Scanning (page 59) or
Scanning Documents with Different Widths (page 62).
b Check the number of sheets.
Up to 50 sheets can be loaded (with paper weight of 80 g/m
2
[20 lb] and thickness of the document
stack under 5 mm).
For details, refer to Loading Capacity (page 56).
2 Fan the documents.
a Grab a stack of documents, which should be 5 mm or less.
47
To Next Page
Loading...
Need help?
General