Appendix
RECOVER YOUR SYSTEM WHEN THE HARD
DRIVE IS NOT BOOTABLE
Restore the Re covery Image for Full Hard Drive
Follow the steps in the “Recovering your R ecovery Image using Recovery and
Utility (for new hard drive or no n-boo table hard drive )” section. You will need the
Bootable Disk an d the Recovery Disk S e t for this task.
Utility t ool: If applicable for your region, the Utility tool contains two options:
Hard Disk Data Delete and Partition Creation.
The Hard Disk Data Delete utility is used to delete all data on the hard disk
and prevent the data from being reused.
NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain
that you want to erase you r entire hard disk, including all partitions.
To delete hard disk data:
1. Click the Hard D isk Data Delete button. The progress bar appears, followed by the EULA screen.
2. Agree to the EULA and click Next .
3. Choose the hard disk from which the data should be deleted in th e list of hard disks and click Next.
The Partition Creation utility is used to change the C: and D: drive partition sizes.
To run this utility: (Th is is not an option when using Win dows 7.)
1. Click the Partition Creation button.
2. A progress bar appears, followed by the EULA screen. Agree to the EULA.
3. On the Recovery To o l - Partition Creation screen, move the s lider to set disk siz e, and then click OK.
4. Click Yes in the Partition Creation confirmation dialog.
WAR NING : It is highly recommended tha t you send your product to Fujitsu
Service to replace a hard drive. A mistake could possibly destroy your
computer, your new hard drive or both.
98 Fujitsu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
