Fujitsu STYLISTIC V535 User Manual

Appendix
It is also important that you create a copy of the software that is essential for your system to access the
internet (hereafter called “essential access s oftw are”) to external writable media or an external drive.
To do so, follow the instructions in the “Creating a Backup of the System-Specific Software Drivers”.
Creating a Backup of Bootable
Disk and Recovery Image
When you purchased you r new system, a copy of the recovery image was loaded into a
hidden partition on your hard disk drive. Having a copy of the recovery image available to
you means that in the event of system failure, you will be able to restore it and re-install
the essential access softwar e using Fujitsu Software Auto In staller.
To make a copy of the recovery image to DVD disks, you will need three or four blank
disks to create the copy. After creating the copy, be s ure to label the disks and keep
them in a safe place to ensure they do not get damaged.
Note: If your system does not have an internal writable DVD drive, connect your
system to an external d rive* before beginning the following step s.
1. Launch System Restore and Recovery from the desktop icon. It will allow you to create
the Bootable Disk and the Recovery Image Disk Set.
2. On “Step 1: Select the Bootable Disk from the list”:
a. Select a media t ype.
b. Not ice the number of disks that are needed for the set.
c. Click Next to proceed.
3. On “Step 2: Confirm your Recovery Disk”, click Next.
4. On “Step 3:” follow the on-screen instructions to make the disk or disk se t, then click
Start. It takes approximately 20 minutes to make one disk.
5. On “Step 4”, when the disk creation is completed, a message a ppears.
Click Finish to exit the program.
6. Repeat Step 1: Select Recovery Disk fro m the list and re peat the abo ve
steps 2(a), 2(b), 2(c), 3, 4 and 5.
* DEPENDING UPON YOUR OPTICAL DRIVE AND MEDIA FORMAT USED, S OM E MEDIA
TYPES MAY BE INCOMPAT IBLE FOR CREATING IMAGE BACKU PS.
94 Fujitsu

Fujitsu STYLISTIC V535 Specifications

General

Stepping	C0
Processor code	SR1SK
Processor cache	2 MB
Processor cores	4
System bus rate	- GT/s
Processor family	Intel Atom®
Processor series	Intel Atom Z3700 Series
Processor codename	Bay Trail
Motherboard chipset	Intel BayTrail-T SoC
Processor frequency	1.59 GHz
Processor cache type	L2
Processor lithography	22 nm
Processor manufacturer	Intel
Processor package size	17 x 17 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor boost frequency	2.39 GHz
Processor operating modes	32-bit, 64-bit
Scenario Design Power (SDP)	2 W
Internal memory	4 GB
Memory clock speed	1066 MHz
Internal memory type	LPDDR3-SDRAM
Storage media	-
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	64 GB
Display diagonal	8.3 \
Touch technology	Multi-touch
Display brightness	400 cd/m²
Display resolution	1920 x 1200 pixels
Native aspect ratio	16:10
Graphics card	HD Graphics
Rear camera type	Single camera
Rear camera resolution (numeric)	8 MP
Front camera resolution (numeric)	2 MP
Number of built-in speakers	2
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	4.0
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Microphone in	No
USB 2.0 ports quantity	1
Device type	Mobile tablet
Form factor	Slate
Product color	Black
Cable lock slot type	Kensington
Sustainability certificates	RoHS
Certification	CE, EN 60950, IT-Eco-Declaration, RoHS, WEEE, GOST
Battery capacity	4425 mAh
Battery life (max)	6.5 h
Battery recharge time	5 h
AC adapter power	36 W
AC adapter frequency	50 - 60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	3 A
AC adapter output voltage	12 V
Platform	Windows
Operating system version	64
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Processor ARK ID	80267
Processor socket	BGA 1380

Weight and Dimensions

Depth	12.5 mm
Width	227.8 mm
Height	150.1 mm
Weight	540 g