Connecting e xternal devices
Connecting external devices
Under all circumstances, please obse rve the safety notes provided in the
"
Important notes", Page 13 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the do cume ntation supplied with the device you wish to conn ect.
Never connect or disconnect cables during a thundersto rm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation s upplied with your external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting an external m onitor
HDMI port (Universal Docking Cradle only)
HDMIport
The HDMI port of the Un iversal Docking Cradle can be used to connect an external
amplifier, LCD TV or a plasma TV with an HDMI connection.
► Connect the data cable to the
external device .
► Connect the data cable to the HDMI port
of the Universal Docking Cradle.
Some LCD televisions have only two speakers/speaker ports and therefore
cannot reproduce Dolby Digital. To play back HDMI sound, you m ust
change the H DMI sound settings accordingly.
You can find the settings under Control Panel - Hardware and Sound. Disable the
settings for Dolby Digital to enable playback of HDMI sound.
Fujitsu 63