Importan t note s
Additional safety notes for devices with
wireless componen ts
Wireless componentsWireless LANBluetooth,Safetynote s
If a radio component (Wireless LAN, Bluetooth) is integrated in your Tablet PC, you must be
sure to observe the following safety precautions concerning you r Ta blet PC:
• Switch off the wireless components when you are in an aircraft or driving in a car.
• Switch off the wireless components when you are in a hospital, an operating
room or near a medical electronics system. The transmitted radio waves
can impair the operation of medical devices.
• Switch off the wireless compo nents, when you let the device get near flammable
gases or into hazardou s environments (e.g. gas station, paint sto res), as the
transmitted rad io waves can cause an explosion or a fire.
For further information o n how to switch the wireless components on and off, refer
to section "
Switching the wireless components on and off", Page 41.
Protecting the display screen
Depending on your
device configuration, where applicable your device is not waterproof.
In this event, do
not pour liquids onto the device and do not wash it with a wet cloth.
Do not place ite
ms on the top of the display, or damage ma y occur.
The warranty do
es not cover a scratched screen.
Energy saving
NotesEnergyPowersaving
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when
they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do
this, you will be able to work longer with the Tablet PC before having to recharge the battery.
The energy efficiency is increased and environmental p ollution is reduced.
You save m one y and help protect the environment.
Energy saving under Windows
► Make use of the available energ y-saving functions as described in chapter
"
Using the energy saving functions", Page 38.
You r Tablet PC is fitted with eMMC memory. Please note that this
technology does not support s leep mode.
14 Fujitsu