6.6
6.6 6.6
6.6
Saving to Card I/F Unit: CU-200
6-45
6.6 Saving to Card I/F Unit: CU-200
6.6.1 Contents to be saved for CU-200
When the CU-200 is installed, the following items can be saved to the memory card in
“[Menu] -> 6: CARD”.
- 4. WR MARK (File name: Mxxxxxxx)
- 5. WR NAV LINE WPT (File name: Wxxxxxxx)
- 6. WR OWN TRACK (File name: Txxxxxxx)
- 7. WT TARGETTRACK (File name: Axxxxxxx)
- 8. WR SETTING DATA (File name: Sxxxxxxx)
- 9. WR INSTALLATION DATA (File name: Ixxxxxxx)
If the SPU board is replaced, retrieve the file written in “[Menu] -> 6 -> 3”.
When retrieve the INSTALLATION DATA file: Ixxxxxxxx, and if “POWER ON
RESTART” is displayed in the ALERT BOX, turn off the power once.
See the following pages for the items to be written in “8. WR SETTING DATA” and “9.
WR INSTALLATION DATA”.
1. [4. WR MARK] (File name: Mxxxxxxx)
Entered marks are saved. The number of points to be stored can be checked in the
[MARK] box menu. The maximum number of storable points is 20,000.
2. [5. WR NAV LINE WPT] (File name: Wxxxxxxx)
“[Menu] -> 8 -> 7:WPT LIST, 9: NAV LINE LIST” is stored.
3. [6. WR OWN TRACK] (File name: Txxxxxxx)
The own ship track is stored. The number of points to be stored can be checked in the
[MARK] box menu. The maximum number of storable points is 20,000.
4. [7. WT TARGET TRACK] (File name: Axxxxxxx)
The other ship track is stored. The number of points to be stored can be checked in
the [MARK] box menu. The maximum number of storable points is 15,000.
To Next Page
Loading...
Need help?
General
