AP1.4
AP1.4 AP1.4
AP1.4
Configuration of the Sentence from
Configuration of the Sentence from Configuration of the Sentence from
Configuration of the Sentence from ECDIS
ECDISECDIS
ECDIS(FEA) to
(FEA) to (FEA) to
(FEA) to ARPA
ARPAARPA
ARPA(FAR.)
(FAR.)(FAR.)
(FAR.)
AP1-25
1.4.7 DPT - Depth
$IIDPT , x.x , x.x *hh<CR><LF>
1 2
Talker ID/Contents Data Note
1 depth, meters Talker ID: EI, II or EC
- DEPTH (DEPTH)
2 offset from transducer (NOT USED)
1.4.8 MWV - Wind
$IIMWV , x.x , T , x.x , N , A *hh<CR><LF>
1 2 3 4 5
Talker ID/Contents Data Note
1 wind angle, 0 to 360 degrees
2 reference, T= true
3 wind speed
4 wind speed units, N= knots
Talker ID: EI, II or EC
- WIND
(TRUE SPEED, TRUE COURSE)
5 status: A= valid
1.4.9 PAESP - Position Adjust Acknowledge
$PAESP , A , x.x , x.x *hh<CR><LF>
1 2 3
Contents Data Note
1 command, A= acknowledge
2 range
- POSITION ADJUST
ACKNOWLEDGE
3 bearing
1.4.10 PAESC - Curved EBL
$PAESC , llll.lll , a , yyyyy.yyy , a , x.x , x.x , x.x , x.x , L *hh<CR><LF>
1 2 3 4 5 6 7
Contents Data Mode
1 latitude, N/S
2 longitude, E/W
3 course
4 radius [0.0 .. 2.0]
5 distance
6 next course
- CURVED EBL
LAT
LON
CRS
RAD
DIST
NEXT CRS
LOCKED
VALID
7 mode, L/M/N
L= LOCKED (curved ebl starts from given lat/lon position)
M= MOVING
(curved ebl starts from own ship and own ship pushes it)
N= NO DATA (curved ebl is not defined)
To Next Page
Loading...
Need help?
General
