Furuno FELCOM18 User Manual

8. MAINTENANCE AND TROUBLESHOOTING
8-8
8.7.2 Warning messages
Messages in this category are prefixed with "WARNING".
Error message Meaning Action
BBER over 80%. Scanning
NCS start manually.
BBER (Bulletin Board Error
Rate) exceeded 80%.
Select NCS manually.
Cannot enter new DNID.
Memory full for DNIDs.
Memory for DNIDs is full. Delete unnecessary DNIDs
to enter new ones.
Cannot enter new ENID.
Memory full for ENIDs.
Memory for ENIDs is full. Delete unnecessary ENIDs
to enter new ones.
Cannot find NCS CC in all
region. Scanning is contin-
ued.
No NCS found in region. Scanning automatically
continues.
Cannot find NCS CC in pre-
ferred region. Scanning all
region is started.
NCS could not be found in
region selected. Scanning
started to find NCS.
If NCS could not be found,
contact you dealer for ad-
vice.
Internal GPS UNIT failure. GPS signal could not be
found.
Internal GPS receiver may
be damaged if this mes-
sage appears frequently.
Contact your dealer for ad-
vice.
Synchronization loss.
Please change EGC chan-
nel.
Your station is not synchro-
nized with selected EGC
channel.
Change EGC channel.
Synchronization loss.
Please check the current
ocean region.
Your station is not synchro-
nized with selected NCS.
Change NCS.

Furuno FELCOM18 Specifications

General

Brand	Furuno
Model	FELCOM18
Category	Marine Equipment
Language	English