Furuno FELCOM18 User Manual

3. SYSTEM INITIALIZATION
3-12
How to automatically print EGC messages
FleetNET
TM
and SafetyNET
TM
messages can be automatically printed.
1. Press the F8 and 5 keys to display the [Auto Mode Setup] menu.
2. Select [Auto EGC Message Print] then press the Enter key.
3. Select the message to process then press the En-
ter key.
4. Select [ON] or [OFF] as appropriate then press
the Enter key.
5. Long-press the Esc key three times to return to
the standby display.
3.5 How to Add NCS Channels
This section shows you how to add NCS channels to the [NCS Channel List]. 19 chan-
nels can be listed per each ocean region. Currently, there are four NCS channels, and
they are marked with asterisks in the list. Add NCS channels to the list as below when
they become operational.
1. Press the F8, 8 and 4 keys to display the [NCS Channel List].
2. Use the arrow keys to put the cursor in a blank [ID] column.
3. Press the Enter key to open the data entry window.
4. Enter NCS channel ID number, in two digits (leading zero is not necessary). The
ID number range is 45-63.
5. Press the Enter key to close the window.
6. Press the → key to select the [FREQ] column then press the Enter key to open
the frequency input window.
7. Enter NCS channel frequency code. The frequency code range is 6000-14000.
8. Press the Enter key to close the window.
9. Press the Esc key to open the [Update] window.
10. [Yes] is selected; press the Enter key to register input.
Note: If the ID or frequency code entered is invalid the message "Input Error: NCS
ID" (for invalid ID) or "Input Error: Channel No." (for invalid frequency code) ap-
pears. Clear the error message by pressing the Esc key. Put the cursor at the in-
valid ID or frequency code. Then, press the Enter key and enter correct ID or
frequency code.
11. Long-press the Esc key to return to the standby display.
Auto EGC Message Print
System OFF
FleetNET OFF
SafetyNET (Safety) OFF
SafetyNET (Urgent & Distress) OFF
NCS Channel List
No
AOR (WEST)
FREQ
11080*01
02
03
04
05
06
07
08
ENTER: Set ESC: Quit
AOR (EAST)
FREQ
12580*
ID
144
1
1
1
1
1
1
1
POR
FREQ
12580*
ID
244
2
2
2
2
2
2
2
IOR
FREQ
10840*
ID
344
3
3
3
3
3
3
3
ID
044
0
0
0
0
0
0
0

Furuno FELCOM18 Specifications

General

Brand	Furuno
Model	FELCOM18
Category	Marine Equipment
Language	English