3. SYSTEM INITIALIZATION
3-7
5. Login begins, and the screen should look something like the one shown below.
When login is completed, the message "Successful Login." appears. Then, the
system goes into “Idle” status and [LOGIN] stops flashing.
6. Long-press the Esc key to return to the standby display.
3.3.2 Logout
1. Press the F7 and 3 keys to display the [Logout] screen.
2. [Yes] is selected in the [Start] window; press the Enter key. The message "Start-
ing Logout Process. Press any key to escape." appears.
3. When logout is completed, the message "Successful Logout." appears and the
[Current State] indication changes from [LOGOUT] to [IDLE]. Then, turn off the
FELCOM.
Current State: LOGIN
CALLING
DCE F19 Ver. **
02-02-25 02:02 (UTC)
LAT: 34:30.00N
LON: 135:30.00E
SYNC ( NCS )
NCS: IOR LOGIN
Options
Login
Starting Login Process.
Press any key to escape.
File Edit Transmit EGC Reports Logs Options Setup StopAlarm
LOGIN replaces IDLE.
Flashing during login
Logout
Start
No
Yes
To Next Page
Loading...
Need help?
General
