Furuno FELCOM18 User Manual

4. FILE OPERATIONS
4-2
2. Press the 1 key to select [New]. The display should now look something like the
illustration below.
Note: When two working areas are opened and you try to open a third file, the
message "Save this message" appears. When this occurs close an open file to
free a working area.
3. The cursor is on the first line. Type your message.
4. To transmit the message you have just prepared, go to section 5.1.2. To save it
to the hard disk, for future transmission, go to section 4.3.2.
4.2.2 How to prepare a confidential file
If communicating with another FELCOM19, you can prepare a confidential message
by entering “S???-addressee code(-password):” in the first line of message text. You
can also receive confidential messages containing this header from a land subscriber
or any MES which uses the FELCOM19.
There are two types of confidential messages: message with addressee code and
message with both addressee code and password.
When the FELCOM receives a confidential message, the message is neither dis-
played nor printed immediately. To display or print the contents of a confidential mes-
sage, the recipient executes the procedure shown in section 5.2.3.
Addressee code and password
Caller and recipient agree beforehand on both the addressee code and the password.
The addressee code might be the title of the recipient; for example, CAPTAIN. The
password could be the classification of the message; for example, SECRET.
How to prepare a message with addressee code
Type the addressee code as shown in the illustration below and then type the text of
message.
<[1] UNTITLED1>
0001|
TELEX
----
*
--------- + --------- + --------- + --------- + --------- + --------- + --------- <
1 Char. [ Line 1/ 1 Col. 1 ] [Insert ]
Cursor can be a square or an underline.
S???-addressee code: (text of message)
Be sure to enter colon.
maximum 8 characters

Furuno FELCOM18 Specifications

General

Brand	Furuno
Model	FELCOM18
Category	Marine Equipment
Language	English