5. INMARSAT COMMUNICATIONS
5-14
9. Select [TRANSMIT] then press the Enter key.
10. Press the Enter key to send the message.
Note: If some data is missing the message "Input error.xx" (xx: error) is displayed.
11. Long-press the Esc key to return to the standby display.
The message "Current State: SENDING" appears at the bottom of the screen during
transmission. If the message was sent successfully "Successful Sending message"
appears and the message is printed ([Confirmation] is turned ON). You can see the
contents on the [Display Log].
At present, not all LESs are offering the 2-digit code services. Contact the LES Oper-
ations Coordinator directly for information.
Some 2-digit code services may be provided free of charge by LESs, while other ser-
vices are available for a fee, in some cases at reduced rates. For information, contact
the LES directly.
5.1.7 Sent message log
The [Sent Message] log stores all messages sent. You can view the contents of the
log as shown below.
1. Press the F6 and 1 keys to show the [Sent Message] log.
2. Select a file then press the Enter key to show file contents.
3. Long-press the Esc key to return to the standby display.
Sent Message
Delivery
OCC(002)
Complete
Message File
ABC
DEF
GHI
JKL
MNO
No.
01
02
03
04
05
Destination
FURUNO
FURUNO
ASDFASDF
ABCDEFGH
LES
KDDI
KDDI
KDDI
KDDI
KDDI
Priority
Normal
Normal
Normal
Normal
Normal
Send Status
Waiting
Sending
11-11-26 9:40
11-11-25 20:16 Sent
11-11-23 16:09
[ENTER]: Show Detail
[Ctrl]+[E]: Export [Ctrl]+[P]: Print [Delete]: Delete
Number assigned by LES
Text
Destination : 870773999113
To Next Page
Loading...
Need help?
General
