4. FILE OPERATIONS
4-8
4.5 How to Save a File Under a New Name
1. Open a file referring to section 4.4.1.
2. Edit the file.
3. Press the F1 key then the 3 (Close) or 4 (Save) key as applicable.
4. For [Close], press the Enter key.
5. Press the BackSpace key to delete the original file name. Enter a file name.
6. Press the Enter key.
Note: Should you decide to save the file under the original name, skip step 5. Over-
write the file by pressing the Enter key, or select [No] then press the Enter key to es-
cape.
4.6 How to Print Files
You can print out a hard copy of files stored on the hard disk.
1. Press the F1 and 7 keys to show a list of files stored on the hard disk.
2. Select a file.
3. Press the Enter key to print the file.
4.7 How to Combine Files
In the example procedure below File A and B are combined.
1. Open file A.
2. Open file B.
3. Put the cursor at the beginning of the file B. While pressing and holding down the
Shift key, press the ↓ key to highlight the entire file. (You can also select a portion
of the file.)
4. Press the C key while holding down the Alt key to place file B on the clipboard.
5. Press the V key while holding down the Alt key to switch to file A.
6. Press the Insert key. File B is inserted at the top of the file A.
To Next Page
Loading...
Need help?
General
