Furuno FS-5000 User Manual

FM-8500
E4-9
5. Changing ID (MMSI) and Private mode
(DSC ROM Ver-03 and after)
Procedures
1. Press the NMI switch S1 on the CONTROL board with the power turned on.
2. Turn off the power.
3. Turn on the power again, then this display will appear.
4. Select EEROM with the arrow key and press [ENT] key. A display “Now WRITING
EEROM” will appear, and after about 15 seconds another display “Turn off the power”
will appear. Then, turn off the power,
5. Turn on the power again, then this display will appear.
6. Press [SELECT] key and the [9] key, then this display will appear.
7. Put the cursor on “ID” by pressing [>] key and press [ENT] key.
TEST VHF ch70
manual
Enter own identification
[digits] MMIS: - - - - - - - -
Changing ID number.
Clear < Do not clear >
NO RAM EEROM ALL
System <Rom Version>
V P ID DSC CH PO L

Furuno FS-5000 Specifications

General

Brand	Furuno
Model	FS-5000
Category	Marine Equipment
Language	English