Garmin Aera 760 User Manual

Garmin aera 760 Pilot’s Guide
190-02674-00 Rev. B
37
Overview
Overview Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index
1.9 NEW LOCATION
The ‘New Location’ menu option is used when the GPS Receiver is having trouble
finding the satellites it expects to be there.
Entering a new location:
1) From the Main Menu, touch Tools > GPS Info > GPS Tab > Menu >
New Location.
2) Touch 'Automatic', 'Use Map', or 'Use Identifier'.
3) After selecting your approximate position using the map pointer or entering
an identifier, touch OK.
4) The GPS Receiver will begin a new search based on the location entered.
1.10 SIMULATOR MODE
Simulator Mode is helpful for practicing with the unit indoors or when no satellite
signals are available. All waypoints and routes created in Simulator Mode are retained
in memory for future use.
NOTE: Do not attempt to navigate using Simulator Mode. When the unit is
set to Simulator Mode, the GPS/GLONASS receiver is turned off. Any Satellite
Signal Strength Bars shown are only simulations and do not represent the
strength of actual satellite signals.
Starting/Stopping Simulator Mode:
From the Main Menu, touch Tools > GPS Info > GPS Tab > Menu >
Simulator.
Adjusting the simulated altitude, track, speed, waypoint, & posi-
tion:
1) From the Main Menu, touch Tools > GPS Info > GPS Tab > Menu >
Start Simulator.
2) Touch Menu > Drive Simulator.
3) Touch the fields to enter the desired data using the keypad.

Garmin Aera 760 Specifications

General

Brand	Garmin
Model	Aera 760
Category	GPS
Language	English