EasyManuals Logo
Home>Gastroback>Coffee Maker>DESIGN ESPRESSO PRO

Gastroback DESIGN ESPRESSO PRO User Manual

Gastroback DESIGN ESPRESSO PRO
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
53
hot. Always ensure that the hot water / steam wand points to the drip
tray, when not in use.Before starting a brewing cycle, always ensure
that the portafilter is installed correctly and firmly in the group head.
Do not remove or even loosen the portafilter from the group head
during operation to avoid risk of burns due to hot water and steam.
Always switch OFF the appliance (turn the selection dial to the ver-
tical position, then press the POWER button), before emptying the
drip tray. Otherwise, due to the backflush system of the appliance hot
water could run out.
DO NOT THROW AWAY THESE INSTRUCTIONS.
TECHNICAL SPECIFICATIONS
Model:
Art.-Nr. 42709 »Design Espresso Pro«
Power supply:
220 - 240 V AC, 50 / 60 Hz, 10 A
Maximum power consump-
tion:
1000 W
Length of power cord:
approx. 100 cm
Weight:
approx. 5.1 kg
Dimensions:
approx. 240 x 274 x 318 mm
(W x D x H)
Capacity of water tank:
MIN: approx. 0.1 Liter (100 ml; 1 Tasse)
MAX: approx. 1.5 Liter
Maximum Pressure:
15 bar (Ulka-Pumpe)
Certificate:
These specifications may change without notice.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gastroback DESIGN ESPRESSO PRO and is the answer not in the manual?

Gastroback DESIGN ESPRESSO PRO Specifications

General IconGeneral
BrandGastroback
ModelDESIGN ESPRESSO PRO
CategoryCoffee Maker
LanguageEnglish

Related product manuals