GE Moisture Target Series 6 User Manual

Appendix C. Reading the MicroSD Card
Moisture Target Series 6 Hygrometer User’s Manual 97
Appendix C. Reading the MicroSD Card
C.1 Removing the Card
IMPORTANT: Before removing the MicroSD Card, refer to section 3.5.4 Ejecting
the SD Card on page 55, to first stop the data log.
1. Locate the memory card in the lower center of the rear panel and pull
the flexible cover from the left. The cover hangs from the right side (see
Figure 51 and Figure 52).
Figure 51: Pulling the Flexible Cover
Figure 52: The Opened Memory Card Holder

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English