GE Moisture Target Series 6 User Manual

Chapter 2. Installation
8 Moisture Target Series 6 Hygrometer User’s Manual
2.3 Mounting the Electronics Unit
The MTS6 unit can be installed in a panel up to 0.25 in. (6 mm) thick. See
Appendix A, Outline and Installation Drawings, for the required panel
cutout dimensions.
IMPORTANT: For NEMA 4 and IP66 installation, the MTS6 must be mounted
in a rigid, flat panel using the panel gasket and both mounting
brackets provided.
2.3.1 Basic Mounting
To mount the MTS6 in a panel with a basic 94 mm (3.69”) x 46 mm (1.81”)
opening, refer to the following figures and complete the following steps:
1. Remove the side panel mount label prior to installation.
Figure 9: Removing Side Panel Mount Label

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English