GE Moisture Target Series 6 User Manual

Chapter 3. Operation and Programming
68 Moisture Target Series 6 Hygrometer User’s Manual
3.6.8 Setting the Volume Mixing Ratio
Note: Setting the Volume Mixing Ratio is an optional feature, available
only if the ppmv software version was purchased.
Note: To set the volume mixing ratio, from
the Settings Menu select V/V Ratio and press
Enter . The following screen appears.
Note: To access the Cal Data menu, the User
Passcode is required (see section 3.6.1 on
page 56).
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the passcode has been entered,
press Enter and the following screen
appears.
3.6.8a Setting the Pressure Units
To set the pressure units, select Press. Units
and press Enter . The following screen
appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter to save (or Cancel
to keep the previous value), and return to the
previous menu.

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English