GE Moisture Target Series 6 User Manual

Chapter 2. Installation
Moisture Target Series 6 Hygrometer User’s Manual 7
2.2 Selecting the Recorder Output (cont.)
4. Locate switch S1 (see Figure 8, highlighted area).
CAUTION! Use proper ESD grounding prior to changing the
switch.
5. Set switch S1 to the desired position: V for voltage or I for current.
Figure 8: Switch S1 on the Main PC Board
6. After setting the switch, replace the cover and reinsert the rear
enclosure screw.

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English