GE MOTOR MANAGER 2 User Manual

8-2 MM2 Motor Manager 2
GE Power Management
8.1 OVERVIEW 8 MM2PC
®
SOFTWARE
8
8.1.3 CHECKING IF INSTALLATION/UPGRADE IS REQUIRED
If MM2PC
®
is already installed it may require upgrading. Run the software and follow the procedure
below:
1. While MM2PC
®
is running, insert the GE Power Management Products CD and allow it to
autostart (alternately, load the index.htm file into your web browser) OR
2. Go to the GE Power Management website at www.GEindustrial.com/pm (preferred method).
3. Select the Software menu item then select MM2 Motor Manager 2 from the list of products.
4. Verify that the software version shown on this page is identical to the installed version as shown
below. Select the Help > About MM2PC
®
menu item to determine which version is installed on
the local PC.
No upgrade is required
if these two numbers match

GE MOTOR MANAGER 2 Specifications

General

Brand	GE
Model	MOTOR MANAGER 2
Category	Controller
Language	English