GE MOTOR MANAGER 2 User Manual

F-2 MM2 Motor Manager 2
GE Power Management
F.1 LISTS APPENDIX F
F
F
IGURE
D–2: MAXIMUM CURRENT WHEN VOLTAGE APPLIED AT ZERO CROSSING.......D-1
F
IGURE
D–3: MOTOR START THREE PHASE CURRENT.......................................................D-2
F
IGURE
E–1: EXCITATION CURVES.........................................................................................E-2
F
IGURE
E–2: EXCITATION CURVES METHOD........................................................................E-3
F.1.2 LIST OF TABLES
T
ABLE
: 1–1 SELECTION GUIDE ............................................................................................... 1-2
T
ABLE
: 4–1 STANDARD OVERLOAD CURVE TRIP TIMES (IN SECONDS)........................... 4-8
T
ABLE
: 4–2 NEMA COMPATIBLE OVERLOAD CURVE TRIP TIMES (IN SECONDS).......... 4-10
T
ABLE
: 6–1 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 01H...................... 6-5
T
ABLE
: 6–2 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 03H...................... 6-6
T
ABLE
: 6–3 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 04H...................... 6-7
T
ABLE
: 6–4 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 05H...................... 6-8
T
ABLE
: 6–5 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 06H...................... 6-9
T
ABLE
: 6–6 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 07H.................... 6-10
T
ABLE
: 6–7 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 08H.................... 6-11
T
ABLE
: 6–8 MASTER/SLAVE PACKET FORMAT FOR FUNCTION CODE 10H.................... 6-12
T
ABLE
: 6–9 MASTER/SLAVE PACKET FORMAT FOR PERFORMING COMMANDS........... 6-14
T
ABLE
: 6–10 MASTER/SLAVE PACKET FORMAT (BROADCAST) ....................................... 6-15
T
ABLE
: 6–11 MM2 MEMORY MAP USER DEFINABLE OUTPUTS ........................................ 6-17
T
ABLE
: 6–12 MODBUS MEMORY MAP .................................................................................. 6-20
T
ABLE
: 6–13 DATA FORMATS................................................................................................ 6-41
T
ABLE
: A–1 MM2 COMMISSIONING.........................................................................................A-1

GE MOTOR MANAGER 2 Specifications

General

Brand	GE
Model	MOTOR MANAGER 2
Category	Controller
Language	English