GE Voluson E8 Service Manual

GE HEALTHCARERAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
3-62 Section 3-11 - Connectivity Setup
3-11-2 Wireless Network Configuration
1.) Connect the Wireless Network adapter as described in Section 3-5-6 on page 3-22.
2.) Press the UTILITIES
key on the control panel and touch SYSTEM SETUP to invoke setup desktop.
3.) On the left side of the screen select CONNECTIVITY
and then click the DEVICE SETUP tab.
4.) Click the WLAN CONFIGURATION
button.
NOTICE
!! NOTICE:
To configure the Voluson E8 / Voluson E6 ultrasound system to work with WLAN, the hospital’s
network administrator has to provide the required information.
Figure 3-58 WLAN Configuration button
[WLAN Configuration]
button

GE Voluson E8 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Power Requirements	100-240 V AC, 50/60 Hz
Applications	Obstetrics, Gynecology, Cardiology
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler
Transducer Ports	4 active transducer ports
Image Storage	Internal hard drive, USB storage
Transducer Types	Linear, Endocavitary
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor