GE HEALTHCAREDRAFT VOLUSON E8 / VOLUSON E6
D
IRECTION KTD102576, REVISION 7 DRAFT (AUGUST 23, 2012) SERVICE MANUAL
Chapter 3 - Setup Instructions 3-21
3-5-5-2-3 Change the Region Code
NOTE: To specify the correct region code, see: Table 3-6, “TV-System and Region Code,” on page 3-21.
1.) If not already done, switch on the Sony DVO-1000MD DVD recorder.
2.) Press the MENU
button (A) located on the front of the DVD, see: Figure 3-10 on page 3-18.
3.) The “Main Menu” appears on the LCD screen of the DVD recorder, see: Figure 3-16 below.
4.) Press the ↓
(down) button on the front of the recorder repeatedly until the [SETUP MENU] item
is highlighted.
5.) Press the →
(right) button. The “Setup Menu” appears, see Figure 3-15 on page 3-20.
6.) Press the ↓
(down) button repeatedly, until [REGION CODE] is highlighted.
7.) Press the →
(right) button. The “Region Code Menu” appears.
8.) Select the appropriate region code by pressing the ↑
(up) or ↓ (down) button respectively.
To check the region code, see: Table 3-6, “TV-System and Region Code,” on page 3-21.
9.) Press the SET
button (C).
The message “Now loading...” appears and the system starts to save the settings.
10.)When “Power off” appears on the display, press the POWER
switch on the front of the DVD
recorder to turn power off.
11.)Press the POWER
switch again to turn power on.
Figure 3-16 “Main Menu” - [SETUP MENU] highlighted
Table 3-6 TV-System and Region Code
Country Region Code TV-System
USA and Canada
1NTSC
Western Europe, Middle East, South Africa
2 PAL
Japan
2NTSC
Southeast Asia, incl. Hong Kong
3 PAL/NTSC
Central and South America, Australia
4 PAL
Africa
5 NTSC
Eastern Europe, Russia, Central Asia incl. India
5 PAL
China
6 PAL
To Next Page
Loading...
Need help?
General
