37
3 Settings
This chapter guides you through the process of setting and configuring the Analyzer and
the Docking Station.
3.1 Activating the Settings
procedure
08/09/03 10:55
AM
JAMES SMITH
1
FIGURE 3-1
Access to the Settings function is dependent
on the setting for Operator ID entry and on
the operator’s user level. The Analyzer is
delivered with the Operator ID set to “Not
Used”.
a) In the Main Menu, press the Settings
button(1).
b) If the requirement for Operator ID entry is
set to “Not Used” (see 3.4.1 General
Settings) FIGURE 3-2 will be displayed, as
this is a password protected function.
Two other screens may be displayed,
dependent on the setting for entry of the
Operator ID:
If the operator’s user level does not
permit access to Settings, FIGURE 3-3
will be displayed.
If the operator’s user level permits access
to Settings, FIGURE 3-4 will be displayed.
1 Settings button
To Next Page
Loading...
Need help?
General
