10 Zone LED Alarm Panel - Engineering Manual
11
2.7 - Tamper Zone Circuit
Any zone may be programmed as a
Tamper zone. Operational in Day and
set, the Tamper circuit will cause a
full alarm condition when activated.
2.8 - PA Zone Circuit
Any quantity of normally closed type
personal attack button may be wired
in series and then connected to the
PA circuit. Operational in Day and
set, the PA circuit will cause a full
alarm condition when activated. PA
is indicated on the control panel or
RKP as Attack.
2.9 - Extension speaker
Extension speaker may be connected to the loudspeaker terminals to produce high volume alarm
tones and low volume entry/exit/fault tones.
External speaker connects to control panel
16 Ohms Extension Speaker