Hercules 10 User Manual

10 Zone LED Alarm Panel - Engineering Manual
19
f. Press to return to Day mode.
g. Immediately enter the engineer code 9-9-9-9 factory default setting. Or go to page 16 how to
enter program mode. If authorized by manager code.
h. The system will go into Engineer program mode. Under engineer mode, you can program.
Engineer Program Mode
The control panel may be programmed to suit a wide variety of installations.
Once the engineer program mode has been accessed, each configuration may be changed in any
order.
Before entering engineer program mode the system should be in the Day mode, with the Day and
PWR indicators lit.
Day
PA
TAMP
1
2
3
4
5
6
7
8
9
10
R ES TE
Day
PA
TAMP
1
2
3
4
5
6
7
8
9
10

Hercules 10 Specifications

General

Brand	Hercules
Model	10
Category	Security System
Language	English