User Manual of DS-7200/7300/8100 Series DVR
188
10.3 Managing HDD Group
10.3.1 Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Group, as shown below:
Figure 10. 9 Storage Mode Interface
The IP Camera is supported by HDVR series only.
3. Click the Apply button and the following Attention box will pop up.
Figure 10. 10 Attention for Reboot
4. Click the Yes button to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
To Next Page
Loading...
Need help?
General