EasyManuals Logo
Home>HIKVISION>Network Hardware>DS-7608NXI-K2

HIKVISION DS-7608NXI-K2 User Manual

HIKVISION DS-7608NXI-K2
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
You can specically secure the stream data of live view by seng the RTSP authencaon.
RTSP Authencaon
Two authencaon types are selectable, if you select digest, only the request with digest
authencaon can access the video stream by the RTSP protocol via the IP address. For
security reasons, it is recommended to select digest as the authencaon type.
ISAPI
ISAPI (Internet Server Applicaon Programming Interface) is an open protocol based on HTTP,
which can realize the
communicaon between the system devices (e.g., network camera,
NVR, etc.). The video recorder is used as a server, the system can nd and connect the video
recorder.
HTTP
The admin user account can disable the HTTP service from the GUI or the web browser.
Aer
the HTTP is disabled, all the related services, including ISAPI and ONVIF, will terminate as
well.
HTTP Authencaon
If you need to enable the HTTP service, you can set the HTTP authencaon to enhance the
access security. Two authencaon types are selectable. For security reasons, it is
recommended to select digest as the
authencaon type.
Camera Added Detecon
The funcon detects the network camera status. If the network camera has been added by
another video recorder, the network camera status will show as in Online Device list.
IOT Monitoring
Aer enabled, the IoT channel will be used for listening.
5.
Click Apply.
7.4 Buzzer Switch
You can enable or disable buzzer with alarm linkage or exceponal linkage.
Steps
1.
Click at the upper-right corner.
2.
Click More.
3.
Go to Buzzer Switch.
4.
Turn on or turn
o Enable.
Network Video Recorder User Manual
88

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NXI-K2 and is the answer not in the manual?

HIKVISION DS-7608NXI-K2 Specifications

General IconGeneral
Product colorBlack
Rack capacity1U
Rack mountingYes
Input bandwidth80 Mbit/s
Output bandwidth160 Mbit/s
Maximum frame rate30 fps
Maximum resolution3840 x 2160 pixels
Alarm input channels4
Video input channels8 channels
Alarm output channels1
Supported resolutions12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Audio formats supportedG.711 A-law, G.711 μ-law, G.722, AAC, G.726
Video formats supportedH.264, H.264+, H.265, H.265+
Wi-FiNo
HDD capacity10000 GB
HDD interfaceSATA
Maximum storage capacity20 TB
Number of HDDs installed0
Number of HDDs supported2
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 1000, 100 Mbit/s
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity8
Output current2.5 A
Output voltage48 V
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget80 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesFederal Communications Commission (FCC), CE
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals