The plaorm server IP address.
Server Port
The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by
the plaorm.
Device ID
The Device ID shall be provided by the plaorm.
Version
ISUP protocol version, only V5.0 is available.
Encrypon Password
Encrypon password is required when using ISUP V5.0 version, it provides more secure
communicaon between the device and plaorm. Enter it for vericaon aer the device is
registered to the ISUP plaorm.
5.
Click Apply to save the sengs and restart the device.
What to do next
You can see the online status (online or oine) aer the device is restarted.
6.2.9 OTAP Service
Steps
1.
Go to
Conguraon → Network → Plaorm Access .
2.
Set Type as OTAP Service.
3.
Turn on Enable.
Note
Enabling OTAP service will disable other plaorm access.
4.
Set the related parameters.
Server Address
The plaorm server IP address.
Port
The plaorm server port ranges from 1 to 65535. The default value is 7800. The actual port
shall be provided by the
plaorm.
Device ID
The Device ID shall be provided by the device.
Key
The key is used for vericaon when the server receives the registraon informaon. 6 to 12
characters are allowed for the key. The default key is abc12345.
5.
Click Apply to save the
sengs and restart the device.
Network Video Recorder User Manual
49