2.
Set email parameters
Server Authencaon
Check it to enable the server authencaon feature.
User Name
The user account of email sender for SMTP server authencaon.
Password
The password of email sender for SMTP server authencaon.
SSL/TLS
(Oponal) Enable SSL/TLS if it is required by the SMTP server.
Aached Picture
(Oponal) If events are triggered, it will send images as email aachment.
Sender
The sender name.
Sender's Address
The sender's email address.
Select Receiver
Select a receiver. Up to 3 receivers are available.
Receiver
The receiver name.
Receiver's Address
The receiver's email address.
Note
For network cameras, the event images are directly sent as the email aachment. One network
camera only sends one picture.
3.
Oponal: Click Test to send a test email.
4.
Click Apply.
5.3 Camera Management
5.3.1 Network Camera
Add Network Camera by Device Password
Add network cameras which the password is the same as your video recorder.
Network Video Recorder User Manual
23
To Next Page
Loading...
Need help?
General
Weight and Dimensions
